Wall sticker questions & answers

How do I order Kleeftaal wall stickers?

Choose a design from the Products page and note its image number or name. Email hello@kleeftaal.co.za with that reference and your preferred colour. Kleeftaal will confirm the order and cost by email. Your order is processed after proof of payment is received.

Can I request a personalised wall sticker?

Yes. Email Kleeftaal for a quote on a personalised design. A design fee applies; confirm the current fee and your requirements before ordering.

Which surfaces can I apply Kleeftaal to?

Apply Kleeftaal to a smooth, dry surface that is free of dust and dirt. Suitable surfaces include walls, wood, glass, concrete and metal. Vinyl will not stick to washable paint containing Teflon. Do not apply it on cold, rainy or wet days.

How long should I wait after painting a wall?

Wait at least two weeks after painting before applying Kleeftaal. The surface must be smooth, dry and free of dust and dirt.

Can Kleeftaal be removed or reused?

Kleeftaal is removable, but it cannot be repositioned or reused. Loosen a corner and peel it away. A hairdryer can help warm stubborn adhesive. Applying or removing a decal can damage a surface; follow the application guidance and warnings.

Where is the Kleeftaal showroom?

Visit Shop 5, Wellington Square, 38 Wellington Street, Bodorp, George, 6529, South Africa. Contact hello@kleeftaal.co.za or WhatsApp 083 494 2324 to discuss your order.

How do I apply Kleeftaal wall stickers?

The design is made up of three layers, in the following order:

• white backing sheet – this will be thrown away
• cut-outs – the vinyl layer – this will stick to the wall
• transparent transfer sheet – also to be thrown away

1. Clean surface.

1. Be sure that the surface you are applying the Kleeftaal to is smooth, dry and free of dust and dirt.
2. Kleeftaal can be applied to walls, wood, glass, concrete, metal or any smooth, dry surface.
3. Kleeftaal is removable but cannot be repositioned or re-used.
4. DO NOT apply on freshly painted walls – wait at least 2 weeks after painting.
5. DO NOT apply on cold, rainy/wet days, as the vinyl will not stick to the wall.

2. Prepare Kleeftaal

1. Lay Kleeftaal design on a flat surface, transfer sheet up.
2. Remove any air bubbles by rubbing from the centre outwards.
3. Cut your design into smaller pieces to make application more manageable.
4. Arrange all Kleeftaal pieces on the wall, transfer sheet facing you, white backing sheet against the wall, sticking it in place with masking tape.
5. DO NOT remove the white backing paper until you are happy with your layout.

3. Apply Kleeftaal

1. Loosen the masking tape on one side of the piece you are working with. Carefully pull off the backing sheet and put the design back in place, with the vinyl now against the surface, making sure that transfer sheet still sticks to the vinyl.
2. Rub across the transfer sheet with your hand, slowly at first, then harder with hand or credit card.
3. Once air bubbles have been removed, carefully pull off the transfer sheet, making sure that the vinyl decal is sticking to your surface and not to the transfer sheet.
4. Bubbles naturally form under vinyl, especially on glass and mirrors. The best way to remove little bubbles that couldn’t be rubbed out from under your vinyl, is by using a fine-needled straight pin or safety pin. Just poke a little hole, and smooth it down with your fingers.

4. Remove Kleeftaal

1. Simply loosen a corner and peel it off the surface, or if the vinyl is a bit stubborn, you can use a hairdryer to warm up the adhesive, which will allow the decal to come off more easily.
2. If some glue still remains on the wall, you can remove it with soap and water or a product called Rubbit Vinyl Glue Remover.

Should I choose gloss or matt vinyl?

We prefer to use gloss vinyl as matt vinyl scratches and shows marks easily. However, some customers prefer matt even though it tends to be more expensive per running meter. The advantages of matt vinyl are that it has no glare and you are able to write with chalk on most of the darker vinyl. If you want the chalkboard look and feel, the matt black vinyl is perfect.

Which vinyl should I use outdoors?

If your vinyl is meant to be outdoors for more than six months at a time, such as on exterior walls, car windows, boats, mailboxes and signs, we highly recommend that you use a 3 to 5 year outdoor vinyl. Other vinyls are thinner and will quickly crack and fade in extreme temperatures.

White exterior vinyl looks best on car windows because it is seen best from a distance. Silver, gold and light grey follow right behind, for a little more subtle colour.

Bear in mind that outdoor vinyls are more expensive.